Mastering the VI editor
University of Hawaii at Manoa
College of Engineering
The VI editor is a screen-based editor used by many Unix users. The VI editor
has powerful features to aid programmers, but many beginning users avoid using
VI because the different features overwhelm them. This tutorial is written to
help beginning users get accustomed to using the VI editor, but also contains
sections relevant to regular users of VI as well. Examples are provided, and
the best way to learn is to try these examples, and think of your own examples
as well... There's no better way than to experience things yourself.
In this tutorial, the following convention will be used:
^X denotes a control character. For example, if you see: ^d in
the tutorial, that means you hold down the control key and then type the
corresponding letter. For this example, you would hold down the control
key and then type d.
The VI editor uses the full screen, so it needs to know what kind of terminal
you have. When you log in, wiliki should ask you what terminal you have. The
prompt looks like this:
TERM = (vt100)
If you know your terminal is a vt100 (or an emulator that can do vt100), just
hit return for the terminal type when you log in. If you have an hp terminal,
type "hp" for the terminal type and hit return. If you are not sure
what kind of terminal you have, ask a lab monitor, or have someone help you set
the correct terminal type.
If you make an error when you log in and type the wrong terminal type, don't
panic and log out. You can type the following commands to fix the settings:
First, tell your shell what type of terminal you have. (If you're not sure
what your shell is, type this command to see what shell you have:
echo $SHELL.) For the examples given, the terminal type is
"vt100". Substitute it with whatever terminal type you have.
For C shell (/bin/csh), the command is this:
set term=vt100
For Bourne Shell (/bin/sh) or Korn Shell (/bin/ksh), the commands are the
following:
export TERM
TERM=vt100
Next, reset your terminal with this command:
tset
Now that the terminal type is (hopefully) correctly set, you are ready to
get started with VI.
The VI editor lets a user create new files or edit existing files. The command
to start the VI editor is vi, followed by the filename. For example,
to edit a file called temporary, you would type vi temporary
and then return. You can start VI without a filename, but when you want to
save your work, you will have to tell VI which filename to save it into
later.
When you start VI for the first time, you will see a screen filled with tildes
(A tilde looks like this: ~) on the left side of the screen. Any blank lines
beyond the end of the file are shown this way. At the bottom of your screen,
the filename should be shown, if you specified an existing file, and the size
of the file will be shown as well, like this:
"filename" 21 lines, 385 characters
If the file you specified does not exist, then it will tell you that it is a
new file, like this:
"newfile" [New file]
If you started VI without a filename, the bottom line of the screen will just
be blank when VI starts. If the screen does not show you these expected
results, your terminal type may be set wrong. Just type :q and return
to get out of VI, and fix your terminal type. If you
don't know how, ask a lab monitor.
Now that you know how to get into VI, it would be a good idea to know how to
get out of it. The VI editor has two modes and in order
to get out of VI, you have to be in command mode. Hit the key labeled
"Escape" or "Esc" (If your terminal does not have such a key,
then try ^[, or control-[.) to get into command mode. If you were
already in the command mode when you hit "Escape", don't worry. It
might beep, but you will still be in the command mode.
The command to quit out of VI is :q. Once in command mode,
type colon, and 'q', followed by return. If your file has been modified in any
way, the editor will warn you of this, and not let you quit. To ignore this
message, the command to quit out of VI without saving is :q!. This
lets you exit VI without saving any of the changes.
Of course, normally in an editor, you would want to save the changes you
have made. The command to save the contents of the editor is :w. You
can combine the above command with the quit command, or :wq. You can
specify a different file name to save to by specifying the name after the
:w. For example, if you wanted to save the file you were working as
another filename called filename2, you would type:
w filename2 and return.
Another way to save your changes and exit out of VI is the ZZ command.
When in command mode, type ZZ and it will do the equivalent of
:wq. If any changes were made to the file, it will be saved. This is
the easiest way to leave the editor, with only two keystrokes.
The first thing most users learn about the VI editor is that it has two modes:
command and insert. The command mode allows the entry of
commands to manipulate text. These commands are usually one or two characters
long, and can be entered with few keystrokes. The insert mode puts
anything typed on the keyboard into the current file.
VI starts out in command mode. There are several commands that put the
VI editor into insert mode. The most commonly used commands to get into
insert mode are a and i. These two commands are described
below. Once you are in insert mode, you get out of it by hitting the
escape key. If your terminal does not have an escape key,
^[ should work (control-[). You can hit escape two times in a row and VI would
definitely be in command mode. Hitting escape while you are
already in command mode doesn't take the editor out of command
mode. It may beep to tell you that you are already in that mode.
The command mode commands are normally in this format: (Optional arguments are
given in the brackets)
Most commands are one character long, including those which use control
characters. The commands described in this section are those which are used
most commonly the VI editor.
The count is entered as a number beginning with any character from 1
to 9. For example, the x command deletes a character under the
cursor. If you type 23x while in command mode, it will
delete 23 characters.
Some commands use an optional where parameter, where you can specify
how many lines or how much of the document the command affects, the
where parameter can also be any command that moves the cursor.
Here is a simple set of commands to get a beginning VI user started. There are
many other convenient commands, which will be discussed in later sections.
- a
- enter insert mode, the characters typed in will be inserted
after the current cursor position. If you specify a count, all the text
that had been inserted will be repeated that many times.
- h
- move the cursor to the left one character position.
- i
- enter insert mode, the characters typed in will be inserted
before the current cursor position. If you specify a count, all the text
that had been inserted will be repeated that many times.
- j
- move the cursor down one line.
- k
- move the cursor up one line.
- l
- move the cursor to the right one character position.
- r
- replace one character under the cursor. Specify count to
replace a number of characters
- u
- undo the last change to the file. Typing u again will re-do
the change.
- x
- delete character under the cursor. Count specifies how many
characters to delete. The characters will be deleted after the cursor.
The VI editor has 36 buffers for storing pieces of text, and also a general
purpose buffer. Any time a block of text is deleted or yanked from the file,
it gets placed into the general purpose buffer. Most users of VI rarely
use the other buffers, and can get along without the other buffers.
The block of text is also stored in another buffer as well, if it is
specified. The buffer is specified using the " command. After
typing ", a letter or digit specifying the buffer must be entered.
For example, the command: "mdd uses the buffer m, and the
last two characters stand for delete current line. Similarly, text can be
pasted in with the p or P command.
"mp pastes the contents of buffer m after the current cursor
position. For any of the commands used in the next two sections, these buffers
can be specified for temporary storage of words or paragraphs.
The command commonly used command for cutting is d. This command
deletes text from the file. The command is preceded by an optional
count and followed by a movement specification. If you double the
command by typing dd, it deletes the current line. Here are some
combinations of these:
- d^
- deletes from current cursor position to the beginning of the line.
- d$
- deletes from current cursor position to the end of the line.
- dw
- deletes from current cursor position to the end of the word.
- 3dd
- deletes three lines from current cursor position downwards.
There is also the y command which operates similarly to the
d command which take text from the file without
deleting the text.
The commands to paste are p and P. The only differ in the
position relative to the cursor where they paste. p pastes the
specified or general buffer after the cursor position, while P
pastes the specified or general buffer before the cursor position. Specifying
count before the paste command pastes text the specified number of
times.
The VI editor has features to help programmers format their code neatly.
There is a variable that to set up the indentation for each level of nesting
in code. In order to set it up, see the customization
section of this tutorial. For example, the command to set the shift
width to 4 characters is :set sw=4.
The following commands indent your lines or remove the indentation, and can
be specified with count:
- <<
- Shifts the current line to the left by one shift width.
- >>
- Shifts the current line to the right by one shift width.
The VI editor also has a helpful feature which checks your source code for
any hanging parentheses or braces. The % command will look for the
left parenthesis or brace corresponding to a particular right parenthesis or
brace and vice versa. Place the cursor onto a parenthesis or brace and type
% to move the cursor to the corresponding parenthesis or brace. This is
useful to check for unclosed parentheses or braces. If a parenthesis or brace
exists without a matching parenthesis or brace, VI will beep at you to
indicate that no matching symbol was found.
The VI editor has two kinds of searches: string and character. For a string
search, the / and ? commands are used. When you start these
commands, the command just typed will be shown on the bottom line, where you
type the particular string to look for. These two commands differ only in
the direction where the search takes place. The / command searches
forwards (downwards) in the file, while the ? command searches
backwards (upwards) in the file. The n and N commands repeat
the previous search command in the same or opposite direction, respectively.
Some characters have special meanings to VI, so they must be preceded by a
backslash (\) to be included as part of the search expression.
Special characters:
- ^
- Beginning of the line. (At the beginning of a search expression.)
- .
- Matches a single character.
- *
- Matches zero or more of the previous character.
- $
- End of the line (At the end of the search expression.)
- [
- Starts a set of matching, or non-matching expressions... For example:
/f[iae]t matches either of these: fit fat fet In this form, it matches
anything except these: /a[^bcd] will not match any of these, but anything
with an a and another letter: ab ac ad
- <
- Put in an expression escaped with the backslash to find the ending
or beginning of a word. For example: /\<the\> should find only word
the, but not words like these: there and other.
- >
- See the '<' character description above.
The character search searches within one line to find a character entered
after the command. The f and F commands search for a
character on the current line only. f searches forwards and
F searches backwards and the cursor moves to the position of the
found character.
The t and T commands search for a character on the current
line only, but for t, the cursor moves to the position before the
character, and T searches the line backwards to the position after
the character.
These two sets of commands can be repeated using the ; or ,
command, where ; repeats the last character search command in the
same direction, while , repeats the command in the reverse
direction.
You can customize the way VI behaves upon start up. There are several edit
options which are available using the :set command, these are the VI and EX
editor options available on Wiliki: (You can get this list by typing
:set all and then return in command mode)
noautoindent magic noshowmatch
autoprint mesg noshowmode
noautowrite nomodelines noslowopen
nobeautify nonumber tabstop=8
directory=/tmp nonovice taglength=0
nodoubleescape nooptimize tags=tags /usr/lib/tags
noedcompatible paragraphs=IPLPPPQPP LIpplpipnpbp term=xterm
noerrorbells prompt noterse
noexrc noreadonly timeout
flash redraw timeoutlen=500
hardtabs=8 remap ttytype=xterm
noignorecase report=5 warn
keyboardedit scroll=11 window=23
keyboardedit! sections=NHSHH HUuhsh+c wrapscan
nolisp shell=/bin/csh wrapmargin=0
nolist shiftwidth=8 nowriteany
Some of these options have values set with the equals sign '=' in it, while
others are either set or not set. (These on or off type of options are called
Boolean, and have "no" in front of them to indicate that they are not
set.) The options shown here are the options that are set without any
customization. Descriptions of some of these are given below, with an
abbreviation. For example, the command set autoindent, you can type
:set autoindent or :set ai. To unset it, you can type
:set noautoindent or :set noai.
- autoindent (ai)
- This option sets the editor so that lines following an
indented line will have the same indentation as the previous line. If you
want to back over this indentation, you can type ^D at the very
first character position. This ^D works in the insert
mode, and not in command mode. Also, the width of the indentations
can be set with shiftwidth, explained below.
- exrc
- The .exrc file in the current directory is read during
startup. This has to be set either in the environment variable
EXINIT or in the .exrc file in your home directory.
- mesg
- Turn off messages if this option is unset using
:set nomesg, so that nobody can bother you while using the
editor.
- number (nu)
- Displays lines with line numbers on the left side.
- shiftwidth (sw)
- This option takes a value, and determines the width of
a software tabstop. (The software tabstop is used for the
<< and >> commands.) For example, you would
set a shift width of 4 with this command: :set sw=4.
- showmode (smd)
- This option is used to show the actual mode of the
editor that you are in. If you are in insert mode, the
bottom line of the screen will say INPUT MODE.
- warn
- This option warns you if you have modified the file, but haven't
saved it yet.
- window (wi)
- This option sets up the number of lines on the window that
VI uses. For example, to set the VI editor to use only 12 lines of your
screen (because your modem is slow) you would use this:
:set wi=12.
- wrapscan (ws)
- This option affects the behavior of the word search. If
wrapscan is set, if the word is not found at the bottom of the
file, it will try to search for it at the beginning.
- wrapmargin (wm)
- If this option has a value greater than zero, the editor
will automatically "word wrap". That is, if you get to within that many
spaces of the left margin, the word will wrap to the next line, without
having to type return. For example, to set the wrap margin to two
characters, you would type this: :set wm=2.
One EX editor command that is useful in the VI editor is the abbreviate
command. This lets you set up abbreviations for specific strings. The command
looks like this: :ab string thing to substitute for. For example, if
you had to type the name, "Humuhumunukunukuapua`a" but you didn't
want to type the whole name, you could use an abbreviation for it. For this
example, the command is entered like this:
:ab 9u Humuhumunukunukuapua`a Now, whenever you type 9u as
a separate word, VI will type in the entire word(s) specified. If you typed in
9university, it will not substitute the word.
To remove a previously defined abbreviation, the command is unabbreviate.
To remove the previous example, the command would be ":una 9u"
To get your listing of abbreviations, simply just type :ab without any
definitions.
Another EX editor command that is useful for customization is the mapping
command. There are two kinds of mapping commands. One for command mode, and
the other for insert mode. These two commands are :map and
:map! respectively. The mapping works similarly to the abbreviation,
and you give it a key sequence and give it another key sequence to substitute
it with. (The substituted key sequences are usually VI commands.)
There are two ways to customize the VI editor. If you create a file called
.exrc in your home directory, all the commands in there will be read
when VI starts up. The other method is to set an environment variable called
EXINIT. The options will be set in your shell's setup file. If you use
/bin/csh (C-Shell), the command is as follows, and is put in the .cshrc
file:
setenv EXINIT '...'
If you use /bin/sh or /bin/ksh, the command is as follows, and is put into the
.profile file:
export EXINIT
EXINIT='...'
Don't put in ... as the example says. In this space put the commands that
you want to set up. For example, if you want to have auto indent, line
numbering, and the wrap margin of three characters, then the setenv command
(for C shell) looks like this:
setenv EXINIT 'set ai nu wm=3'
If you want to put more than one command in the setenv EXINIT thing,
separate the commands with a vertical bar (|). For example, to map the 'g'
command to the 'G' character in command mode, the command is
:map g G, and combined with the above command, you get this:
setenv EXINIT 'set ai nu wm=3|map g G'
If you want to create the file called .exrc, you can put exactly the
same things in the file as shown in the quotes after the EXINIT.
The VI editor edits a temporary copy of your file, and after the editing
is complete, or when you tell it to save, it puts the contents of the
temporary copy into the original file. If something goes wrong while you are
editing your file, the VI editor will attempt to save whatever work you had in
progress, and store it for later recovery. (Note: If VI dies while you were
working on any file, it sends you an email message on how to recover it.
The -r option stands for recovery. If you were editing the file
vitalinfo, and you accidentally got logged out, then the -r
option of the 'vi' editor should help. The command would look somewhat like
this: vi -r vitalinfo After using the -r option once,
though, you MUST save what you have recovered to the actual file... The
-r option only works once per failed VI session.
There are two things to be aware of when using the workstations: Editing
the same file many times at once, and changing the size of the screen.
Because VI edits a copy of your original file and saves the contents of
that copy into the original file, if you are logged on more than once and are
editing the same file more than once using VI, if you save on one window and
then you save on the other window, the changes made to the file on the first
save would be overwritten. Make sure that you only run one copy of VI per
file.
If you use a terminal program from a workstation, you can change the size
of the screen by dragging the sides of the window. If the size is not working
properly, the command to type is this:
eval `resize`
If that doesn't work the command would be this:
eval `/usr/bin/X11/resize`
If the size is wrong, the editor will not operate correctly. If you have any
problems with the screen size, ask the monitors in the computer lab for help
setting the sizes correctly.
This list is a summary of VI commands, categorized by function. There may
be other commands available, so check the on-line manual on VI. For easy
reference, you can save this file as text and delete any commands you don't
think you would use and print out the resulting shorter file.
- "
- Specify a buffer to be used any of the commands using buffers. Follow
the " with a letter or a number, which corresponds to a buffer.
- D
- Delete to the end of the line from the current cursor position.
- P
- Paste the specified buffer before the current cursor position or line.
If no buffer is specified (with the " command.) then 'P' uses the
general buffer.
- X
- Delete the character before the cursor.
- Y
- Yank the current line into the specified buffer. If no buffer is
specified, then the general buffer is used.
- d
- Delete until where. "dd" deletes the current line. A count
deletes that many lines. Whatever is deleted is placed into the buffer
specified with the " command. If no buffer is specified, then the
general buffer is used.
- p
- Paste the specified buffer after the current cursor position or line.
If no buffer is specified (with the " command.) then 'p' uses the general
buffer.
- x
- Delete character under the cursor. A count tells how many
characters to delete. The characters will be deleted after the cursor.
- y
- Yank until , putting the result into a buffer. "yy" yanks the
current line. a count yanks that many lines. The buffer
can be specified with the " command. If no buffer is specified, then
the general buffer is used.
- A
- Append at the end of the current line.
- I
- Insert from the beginning of a line.
- O
- (letter oh) Enter insert mode in a new line above the current
cursor position.
- a
- Enter insert mode, the characters typed in will be inserted
after the current cursor position. A count inserts all the text that
had been inserted that many times.
- i
- Enter insert mode, the characters typed in will be inserted
before the current cursor position. A count inserts all the text that had
been inserted that many times.
- o
- Enter insert mode in a new line below the current cursor
position.
- ^B
- Scroll backwards one page. A count scrolls that many pages.
- ^D
- Scroll forwards half a window. A count scrolls that many lines.
- ^F
- Scroll forwards one page. A count scrolls that many pages.
- ^H
- Move the cursor one space to the left. A count moves that many spaces.
- ^J
- Move the cursor down one line in the same column. A count moves that
many lines down.
- ^M
- Move to the first character on the next line.
- ^N
- Move the cursor down one line in the same column. A count moves that
many lines down.
- ^P
- Move the cursor up one line in the same column. A count moves that
many lines up.
- ^U
- Scroll backwards half a window. A count scrolls that many lines.
- $
- Move the cursor to the end of the current line. A count moves to the
end of the following lines.
- %
- Move the cursor to the matching parenthesis or brace.
- ^
- Move the cursor to the first non-whitespace character.
- (
- Move the cursor to the beginning of a sentence.
- )
- Move the cursor to the beginning of the next sentence.
- {
- Move the cursor to the preceding paragraph.
- }
- Move the cursor to the next paragraph.
- |
- Move the cursor to the column specified by the count.
- +
- Move the cursor to the first non-whitespace character in the next line.
- -
- Move the cursor to the first non-whitespace character in the previous
line.
- _
- Move the cursor to the first non-whitespace character in the current
line.
- 0
- (Zero) Move the cursor to the first column of the current line.
- B
- Move the cursor back one word, skipping over punctuation.
- E
- Move forward to the end of a word, skipping over punctuation.
- G
- Go to the line number specified as the count. If no count is given,
then go to the end of the file.
- H
- Move the cursor to the first non-whitespace character on the top of
the screen.
- L
- Move the cursor to the first non-whitespace character on the bottom of
the screen.
- M
- Move the cursor to the first non-whitespace character on the middle of
the screen.
- W
- Move forward to the beginning of a word, skipping over punctuation.
- b
- Move the cursor back one word. If the cursor is in the middle of a
word, move the cursor to the first character of that word.
- e
- Move the cursor forward one word. If the cursor is in the middle of
a word, move the cursor to the last character of that word.
- h
- Move the cursor to the left one character position.
- j
- Move the cursor down one line.
- k
- Move the cursor up one line.
- l
- Move the cursor to the right one character position.
- w
- Move the cursor forward one word. If the cursor is in the middle of a
word, move the cursor to the first character of the next word.
- ^E
- Scroll forwards one line. A count scrolls that many lines.
- ^Y
- Scroll backwards one line. A count scrolls that many lines.
- z
- Redraw the screen with the following options.
"z" puts the current line on the top of the screen; "z." puts
the current line on the center of the screen; and "z-" puts the current
line on the bottom of the screen. If you specify a count before the
'z' command, it changes the current line to the line specified. For
example, "16z." puts line 16 on the center of the screen.
- C
- Change to the end of the line from the current cursor position.
- R
- Replace characters on the screen with a set of characters entered,
ending with the Escape key.
- S
- Change an entire line.
- c
- Change until . "cc" changes the current line. A count changes
that many lines.
- r
- Replace one character under the cursor. Specify a count to replace a
number of characters.
- s
- Substitute one character under the cursor, and go into insert mode.
Specify a count to substitute a number of characters. A dollar sign
($) will be put at the last character to be substituted.
- ,
- Repeat the last f, F, t or T command in the reverse direction.
- /
- Search the file downwards for the string specified after the /.
- ;
- Repeat the last f, F, t or T command.
- ?
- Search the file upwards for the string specified after the ?.
- F
- Search the current line backwards for the character specified after
the 'F' command. If found, move the cursor to the position.
- N
- Repeat the last search given by '/' or '?', except in the reverse
direction.
- T
- Search the current line backwards for the character specified after
the 'T' command, and move to the column after the if it's found.
- f
- Search the current line for the character specified after the 'f'
command. If found, move the cursor to the position.
- n
- Repeat last search given by '/' or '?'.
- t
- Search the current line for the character specified after the 't'
command, and move to the column before the character if it's found.
- ~
- Switch the case of the character under the cursor.
- <
- Shift the lines up to where to the left by one shiftwidth.
"<<" shifts the current line to the left, and can be specified with a
count.
- >
- Shift the lines up to where to the right by one
shiftwidth. ">>" shifts the current line to the right, and can be
specified with a count.
- J
- Join the current line with the next one. A count joins that many lines.
- ^\
- Quit out of "VI" mode and go into "EX" mode. The EX editor is the
line editor VI is build upon. The EX command to get back into VI is
":vi".
- Q
- Quit out of "VI" mode and go into "EX" mode. The ex editor is a
line-by-line editor. The EX command to get back into VI is ":vi".
- ZZ
- Exit the editor, saving if any changes were made.
- ^G
- Show the current filename and the status.
- ^L
- Clear and redraw the screen.
- ^R
- Redraw the screen removing false lines.
- ^[
- Escape key. Cancels partially formed command.
- ^^
- Go back to the last file edited.
- !
- Execute a shell. If a is specified, the program which is
executed using ! uses the specified line(s) as standard input, and will
replace those lines with the standard output of the program executed.
"!!" executes a program using the current line as input.
For example, "!4jsort" will take five lines from the current cursor
position and execute sort. After typing the command, there will be a
single exclamation point where you can type the command in.
- &
- Repeat the previous ":s" command.
- .
- Repeat the last command that modified the file.
- :
- Begin typing an EX editor command. The command is executed once the
user types return. (See section below.)
- @
- Type the command stored in the specified buffer.
- U
- Restore the current line to the state it was in before the cursor
entered the line.
- m
- Mark the current position with the character specified after the 'm'
command.
- u
- Undo the last change to the file. Typing 'u' again will re-do the
change.
The VI editor is built upon another editor, called EX. The EX editor only
edits by line. From the VI editor you use the : command to start entering an
EX command. This list given here is not complete, but the commands given are
the more commonly used. If more than one line is to be modified by certain
commands (such as ":s" and ":w" ) the range must be specified before the
command. For example, to substitute lines 3 through 15, the command is
":3,15s/from/this/g".
- :ab string strings
- Abbreviation. If a word is typed in VI corresponding
to string1, the editor automatically inserts the
corresponding words. For example, the abbreviation
":ab usa United States of America" would insert the
words, "United States of America" whenever the word
"usa" is typed in.
- :map keys new_seq
- Mapping. This lets you map a key or a sequence of
keys to another key or a sequence of keys.
- :q
- Quit VI. If there have been changes made, the editor
will issue a warning message.
- :q!
- Quit VI without saving changes.
- :s/pattern/to_pattern/options
-
Substitute. This substitutes the specified pattern with
the string in the to_pattern. Without options, it only
substitutes the first occurence of the pattern. If a 'g'
is specified, then all occurences are substituted. For
example, the command ":1,$s/Dwayne/Dwight/g" substitutes
all occurences of "Dwayne" to "Dwight".
- :set [all]
- Sets some customizing options to VI and EX. The ":set
all" command gives all the possible options. (See the
section on customizing VI for some options.)
- :una string
- Removes the abbreviation previously defined by ":ab".
- :unm keys
- Removes the remove mapping defined by ":map".
- :vi filename
- Starts editing a new file. If changes have not been
saved, the editor will give you a warning.
- :w
- Write out the current file.
- :w filename
- Write the buffer to the filename specified.
- :w >> filename
- Append the contents of the buffer to the filename.
- :wq
- Write the buffer and quit.
Any questions or comments should be directed to the following address:
ben@wiliki.eng.hawaii.edu (Ben Y. Yoshino)
Last updated on Monday, October 3, 1994
Copyright © 1994 University of Hawaii, College of Engineering, Computer Facility
All rights reserved.